I purchased a dirtbike that I had to partly assemble. Where is this tube supposed to go? - pictures of dirtbike birthday cakes
Not sure what this pipe is connected, if at all. Here is a picture of her:
http://img18.imageshack.us/img18/1788/img00029200904251547.jpg
Pictures Of Dirtbike Birthday Cakes I Purchased A Dirtbike That I Had To Partly Assemble. Where Is This Tube Supposed To Go?
7 comments:
This is the excess carbohydrates / drain hose.
It fits into any office and should hang in the air. Do not get it, cuz if the image in the kickstart could be caught. Poke behind the oil filler cap for security.
This is the excess carbohydrates / drain hose.
It fits into any office and should hang in the air. Do not get it, cuz if the image in the kickstart could be caught. Poke behind the oil filler cap for security.
It was similar to that in 83 Honda. This was for a fuel leak from a container every time you open you allow the screw to the drain valve carburetor. The location of oil drain is now clear that you can understand what it means for the tube. Good luck
I'm almost 98% of the enable positive condensing tube just so that the discharge of condensate
Who looks like sticking your drain drainage drainage or fuel and must be on the floor
It appears from the bottom of the carburetor.
It seems a sort of drainage and should be left in place.
Post a Comment